メインコンテンツにスキップ

手順2に変更

Sharon Pikulさんによる編集

承認済みの編集 : Walter Galan

変更なし

手順ライン

-[* yellow] Unfasten 3 Phillips #1 screws.
+[* black] Unfasten 3 Phillips screws revealed beneath the heat sink on the CPU board.
+[* black] Carefully remove the CPU board from the Mother Board.
+[* black] Remove the barrell nut screws from the Mother Board which held the CPU board.
+[* black] Unfasten 3 Phillips #1 screws on Mother Board as shown in illustration 1.
[* black] Slide the logic board about a quarter of an inch to free it from the three retaining pins.
[* black] Pull upwards and outwards to fully remove the logic board.