手順2に変更
- AmitPによって編集
承認済みの編集 : Jake Devincenzi
- 前
- 後
- 変更なし
手順ライン
| - | [* red] Unscrew 8 T10 screws from the cooling unit |
|---|---|
| - | [* icon_note] The |
| + | [* red] Unscrew 8 T10 screws from the cooling unit. G5 models with the large Fujikura heat sinks (not shown in picture) will have 8 2.5mm hex screws. |
| + | [* icon_note] The screws are somewhat hidden, so they cannot be see in the picture. |
| [* icon_note] To visualize the location of the screws look 3 steps ahead. | |
| [* black] The screws will loosen but will not come out, they are designed to loosen the unit, but remain in place. |