Skip to main content

Changes to Step #1

Edit by Rachel Kangas

承認済みの編集 by Rachel Kangas

Deleted
Added
Unchanged

Step Lines

[* black] A series of eightEight 10.25 mm T8 Torx screws secure the heat sink to the logic board, and the logic board to the hard drive slot.
[* black]
board. Unscrew all eight screws, allowing the heat sinks to slide apart.
[* black] A series of eightEight 10.25 mm T8 Torx screws secure the heat sink to the logic board, and the logic board to the hard drive slot.
[* black]
board. Unscrew all eight screws, allowing the heat sinks to slide apart.