メインコンテンツにスキップ

手順4に変更

iRobotさんによる編集

承認の保留中

変更なし

手順ライン

+[* icon_note] It may be necessary to soften the thermal paste between the logic board and heat sink. You can soften the thermal compound using a hairdryer. Move the hairdryer back and forth over the ribbed metal section of the heat sink for one minute. At this point, the heat sink should come free easily.
+[* black] Use a spudger to pry the heat sink up on the left side, near the hard drive.

画像1

以前の画像はありません

追加