メインコンテンツにスキップ

Fix Your Stuff

Right to Repair

Parts & Tools

手順3に変更

NoTraceOfSenseさんによる編集

承認済みの編集 : NoTraceOfSense

削除済み
追加
変更なし

手順ライン

[* red] Unscrew the two screws on the neck computer chipfret PCB using a PH1 Phillips head screwdriver. Each screw is 0.8 cm.
[* black] Remove the neck computer chipfret PCB
[* icon_caution] The neck computer chipfret PCB is in very tight. Be careful not to break it.
[* red] Unscrew the two screws on the neck computer chipfret PCB using a PH1 Phillips head screwdriver. Each screw is 0.8 cm.
[* black] Remove the neck computer chipfret PCB
[* icon_caution] The neck computer chipfret PCB is in very tight. Be careful not to break it.
[* icon_note] The connector from the neck to the body can easily slide out of place. Make sure it is in position before closing the neck