メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順3に変更

Brian Mingelsさんによる編集

承認済みの編集 : Brian Mingels

削除済み
追加
変更なし

手順ライン

[* red] Unscrew the two screws on the neck computer chip using a PH1 Phillips head screwdriverscrewdriver. Each screw is 0.8 cm.
[* red] Unscrew the two screws on the neck computer chip using a PH1 Phillips head screwdriverscrewdriver. Each screw is 0.8 cm.
[* black] Remove the neck computer chip
[* icon_caution] The neck computer chip is in very tight. Be careful not to break it.
[* icon_note] The connector from the neck to the body can easily slide out of place. Make sure it is in position before closing the neck