メインコンテンツにスキップ

手順 2 への変更

- Danielle Millianによって編集

承認済みの編集 : Danielle Millian

削除
追加
変更なし

手順ライン

[* black] Use 1/8" allen wrench to loosen the screw inside the grip on the right side.
[* icon_note] ''theThe screw only needs to be turned a couple of times.''
[* icon_note] ''theThe screw only needs to be turned a couple of times.''
[* black] Slide the upper frame forward on the rails and remove the screw from the slot to separate the two halves of the body.
[* icon_caution] '''BE CAREFUL: Do not pull the two frames apart too much or thetoo quickly. This may cause the wires mightto be damaged if the two pieces are pulled apart too quicklydamaged.'''
[* icon_caution] '''BE CAREFUL: Do not pull the two frames apart too much or thetoo quickly. This may cause the wires mightto be damaged if the two pieces are pulled apart too quicklydamaged.'''