メインコンテンツにスキップ

手順 2 への変更

- Churchill Carterによって編集

承認済みの編集 : Churchill Carter

削除
追加
変更なし

手順ライン

[* black] Use 1/8" allen wrench to loosen the screw inside the grip on the right side.
[* icon_note] ''Itthe screw only needs to be turned a couple of times.''
[* black] Slide the upper frame forward on the rails and remove the screw out offrom the slot to separate the two halves of the body.
[* icon_caution] '''BE CAREFUL: Do not pull the two frames apart too much or the wires might be damageddamaged if the two pieces are pulled apart too quickly.'''
[* icon_note] ''Itthe screw only needs to be turned a couple of times.''
[* black] Slide the upper frame forward on the rails and remove the screw out offrom the slot to separate the two halves of the body.
[* icon_caution] '''BE CAREFUL: Do not pull the two frames apart too much or the wires might be damageddamaged if the two pieces are pulled apart too quickly.'''