メインコンテンツにスキップ

手順 2 への変更

- Danielle Millianによって編集

承認済みの編集 : Danielle Millian

削除
追加
変更なし

手順ライン

[* black] Use 1/8" allen wrench to loosen the screw inside the grip on the right side.
[* [* icon_note] It''It only needs to be turned a couple of times.times.''
[* [* icon_note] It''It only needs to be turned a couple of times.times.''
[* black] Slide the upper frame forward and the screw out of the slot to separate the two halves of the body.
[* icon_caution] '''BE CAREFUL: Do not pull the two frames apart too much or the wires might be damaged.'''