メインコンテンツにスキップ

手順 2 への変更

- Nathan Reeveによって編集

承認済みの編集 : Nathan Reeve

削除
追加
変更なし

手順ライン

[* icon_caution] Four black internal wires, three thin and one thick, are connected to the logic board: three by small end clips and one by a larger end clip. Handle the clips gently; they break easily.
[* icon_caution] Four black internal wires, three thin and one thick, are connected to the logic board: three by small end clips and one by a larger end clip. Handle the clips gently; they break easily.
[* black] To detach the small clips from the connectors, place the flat end of the plastic spudger underneath the clip and gently lever it '''away from the center of the device'''.
[* black] To detach the large clip from its connector, place the flat end of the spudger on the clip and lever it '''upward''' out of the connector.