メインコンテンツにスキップ

手順 2 への変更

- Keith Yuによって編集

承認済みの編集 : Keith Yu

削除
追加
変更なし

手順ライン

[* black] Four internal wires are connected to the logic board: three by small end clips and one by a larger end clip. To detach the small clips from the connectors, place the flat end of the plastic spudger underneath the clip and gently lever it '''toward youaway from the center of the device'''.
[* black] Four internal wires are connected to the logic board: three by small end clips and one by a larger end clip. To detach the small clips from the connectors, place the flat end of the plastic spudger underneath the clip and gently lever it '''toward youaway from the center of the device'''.
[* black] To detach the larger one, place the flat end of the plastic spudger on the side of the clip and lever it '''upward'''.
[* icon_caution] Handle the clips gently; they break easily.