メインコンテンツにスキップ

手順 2 への変更

- Rachel Kangasによって編集

承認済みの編集 : Rachel Kangas

削除
追加
変更なし

手順ライン

[* black] There are three internalFour internal wires are connected to the logic boardboard: three by small end clips. There isclips and one internal wire that is connected by a larger end clip. To releasedetach the small clipsclips from the connectors, place the flat end of the plasticplastic spudger underneath the clip and gently lever it '''outward''' to detach it from the connectortoward you'''.
[* black] To releasedetach the larger clipone, place the flat end of the plastic spudger on the side of the clip and lever it '''upward''' to slide it out of its little casingupward'''.
[* icon_caution] TheseHandle the clips are fairly delicate and willgently; they break if handled roughly. Handle them gentlyeasily.
[* black] There are three internalFour internal wires are connected to the logic boardboard: three by small end clips. There isclips and one internal wire that is connected by a larger end clip. To releasedetach the small clipsclips from the connectors, place the flat end of the plasticplastic spudger underneath the clip and gently lever it '''outward''' to detach it from the connectortoward you'''.
[* black] To releasedetach the larger clipone, place the flat end of the plastic spudger on the side of the clip and lever it '''upward''' to slide it out of its little casingupward'''.
[* icon_caution] TheseHandle the clips are fairly delicate and willgently; they break if handled roughly. Handle them gentlyeasily.