メインコンテンツにスキップ

手順 2 への変更

- Rachel Kangasによって編集

承認済みの編集 : Rachel Kangas

削除
追加
変更なし

手順ライン

[* black] Four internal wireswires, three thin and one thick, are connected to the logic board: three by small end clips and one by a larger end clip. To detach the small clips from the connectors, place the flat end of the plastic spudger underneath the clip and gently lever it '''away from the center of the device'''.
[* black] Four internal wireswires, three thin and one thick, are connected to the logic board: three by small end clips and one by a larger end clip. To detach the small clips from the connectors, place the flat end of the plastic spudger underneath the clip and gently lever it '''away from the center of the device'''.
[* black] To detach the larger one, place the flat end of the plastic spudger on the side of the clip and lever it '''upward'''.
[* icon_caution] Handle the clips gently; they break easily.

画像2

以前の画像はありません

追加