メインコンテンツにスキップ

手順 4 への変更

- Keith Yuによって編集

承認済みの編集 : Keith Yu

削除
追加
変更なし

手順ライン

[* red] Using the T9 Torx head, remove the two screws at the bottom of the 1.2 inch gap going down the middle of the device.
[* icon_reminder] The internal structure will thenThese screws can come out; be released fromcareful to not lose them. If you don't fully loosen the case; however, unlike most screws,screw, then they will not come out ofcan stay on the deviceinternal structure.
[* icon_reminder] The internal structure will thenThese screws can come out; be released fromcareful to not lose them. If you don't fully loosen the case; however, unlike most screws,screw, then they will not come out ofcan stay on the deviceinternal structure.

画像1

古いバージョン

新しいバージョン