メインコンテンツにスキップ

Fix Your Stuff

Right to Repair

Parts & Tools

手順1に変更

vincentjolyさんによる編集

承認済みの編集 : vincentjoly

削除済み
追加
変更なし

手順ライン

[* black] Remove the two Torx screws to release the lower access panel and set it aside.
[* black]
Verify if there is water in the base and remove as much as you can with a rag (as pictured).
[* black]
It is normal to see a small amount of water in there but if there is a large amount, this may be what is causing the float to remain up and you may have a biggerdifferent issue.
[* black] Remove the two Torx screws to release the lower access panel and set it aside.
[* black]
Verify if there is water in the base and remove as much as you can with a rag (as pictured).
[* black]
It is normal to see a small amount of water in there but if there is a large amount, this may be what is causing the float to remain up and you may have a biggerdifferent issue.