手順13に変更
手順ライン
[* red] On the plastic guard, there are two rubber pads that cover the buttons. Remove them. |
[* icon_note] These pads rest on the motherboard and sometimes stick to it. If they do, peel them off. |
[* yellow] With the rubber pads off, you may use your fingers to remove the buttons to clean or replace them. |
[* icon_reminder] When returning the buttons to the guard, they have to be put back in exactly the way they were pulled out. |
[* icon_reminder] When returning the buttons to the guard, they have to be put back in exactly the way they were pulled out. |