メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

手順13に変更

Bradleyさんによる編集

承認の保留中

変更なし

手順ライン

[* red] On the plastic guard, you'll seethere are two rubber pads which lay overcover the buttons, go ahead and takebuttons. Take them off.
[* icon_note] These pads actually rest on the logic board and sometimes stick on to the boardit. If they happen to be on the board go ahead anddo, peel them off.
[* yellow] With those pads off you can takeoff, the buttons can be taken out of the guard and clean/replace themto be cleaned or replaced.
[* icon_reminder] When you returnreturning the buttons to the guard, they have to be put back exactly the way youthey were pulled them out.
[* red] On the plastic guard, you'll seethere are two rubber pads which lay overcover the buttons, go ahead and takebuttons. Take them off.
[* icon_note] These pads actually rest on the logic board and sometimes stick on to the boardit. If they happen to be on the board go ahead anddo, peel them off.
[* yellow] With those pads off you can takeoff, the buttons can be taken out of the guard and clean/replace themto be cleaned or replaced.
[* icon_reminder] When you returnreturning the buttons to the guard, they have to be put back exactly the way youthey were pulled them out.