メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

手順8に変更

David Hodsonさんによる編集

承認の保留中

変更なし

手順ライン

[* black] The entire logic board is now accessible.
[* icon_caution] From here on out, extremeTake extreme care is necessarywhen working with the logic board to avoid damaging the device and its components.
[* red] A small ribbon connects the start and select buttons to the power source on the lower portion of the logic board. It can rip very easily so, do not pull on it.
[* black] WithLift the faceplate removed as previously instructed, you will be able to pulllogic board and front plastic cover assembly off of the front metal cover from the device. Do soplate.
[* icon_note] Once the cover'splate is off, the plastic on/off switch will fall out of place.
[* icon_caution] From here on out, extremeTake extreme care is necessarywhen working with the logic board to avoid damaging the device and its components.
[* red] A small ribbon connects the start and select buttons to the power source on the lower portion of the logic board. It can rip very easily so, do not pull on it.
[* black] WithLift the faceplate removed as previously instructed, you will be able to pulllogic board and front plastic cover assembly off of the front metal cover from the device. Do soplate.
[* icon_note] Once the cover'splate is off, the plastic on/off switch will fall out of place.