メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

手順5に変更

David Hodsonさんによる編集

承認の保留中

変更なし

手順ライン

[* black] To remove the plastic guard, grab the edges and lift off the device.
[* yellow] The right edge of the plastic guard has a clip which holds it down. Using the spudger, depress the clip and pull the plastic guard off of the logic board.
[* red] The next step will have you removeRemove the two remaining gold #00 Phillips screws on the logic board.
[* red] The next step will have you removeRemove the two remaining gold #00 Phillips screws on the logic board.