手順1に変更
- Zachary Gayによって編集
承認済みの編集 : Zachary Gay
- 前
- 後
- 変更なし
手順ライン
| [* black] Carefully lift up the small part of the motherboard which contains the camera and lens. | |
| - | [* black] On the back on the camera, use the |
| + | [* black] On the back on the camera, use the PH0 head to release the two screws. |
| [* black] The lens is the black part attached to the black and red wire. | |
| [* red] Use pliers to remove the white connector from the adapter of the motherboard. | |
| [* black] Replace lens if needed. |