| - | [* black] Begin at the top near the bumpers |
|---|
| - | [* black] Using the plastic pry tool begin to remove the plastic faceplate. |
|---|
| + | [* black] Using the plastic pry tool begin to remove the plastic faceplate. Begin at the top near the bumpers and work down each grip. You may need to remove the magnetic thumb sticks for clearance. |
|---|
| + | [* black] The clips are quite sturdy and you shouldn't be afraid to be firm with removing the faceplate to dislodge the clips. There are four clips down each grip and there is also dampening tape which isnt an IP requirement and wont need replacing. |
|---|