手順1に変更
- Kristen Gismondiによって編集
承認済みの編集 : Kristen Gismondi
- 前
- 後
- 変更なし
手順ライン
| - | [* red] Refer to the three small, outer screws (6mm in length) on the upper part of the motherboard. |
|---|---|
| - | [* black] Loosen these screws using the JIS1 Philips head. |
| - | [* black] Use the opening tool to release the motherboard from the device. |
| - | [* icon_note] There should be 7 screws that will be removed at this point. |
| + | [* red] Remove the three 6 mm screws from the upper part of the motherboard using a JIS #1 screwdriver. |
| + | [* black] Use an opening tool to release the motherboard from the device. |