メインコンテンツにスキップ

手順3に変更

oldturkey03さんによる編集

承認済みの編集 : oldturkey03

変更なし

手順ライン

[* black] Insert wisdom here.Tilt the bottom case slightly toward the trigger buttons to slide it off the top case
[* yellow] Here is a view of the inside of the controller. Note the vibration motors having different counter weights.
[* blue] Remove the connector from the left motor (controller is positioned upside down, left controller will be shown right etc.)
[* black] Insert wisdom here.Tilt the bottom case slightly toward the trigger buttons to slide it off the top case
[* yellow] Here is a view of the inside of the controller. Note the vibration motors having different counter weights.
[* blue] Remove the connector from the left motor (controller is positioned upside down, left controller will be shown right etc.)

画像2

古いバージョン

新しいバージョン

画像3

古いバージョン

新しいバージョン