メインコンテンツにスキップ

手順2に変更

oldturkey03さんによる編集

承認済みの編集 : oldturkey03

変更なし

手順ライン

[* red] Remove the seven 9.3 mm T8 Security Torx screws securing the rear case to the front case.
[*
black] Insert wisdom herea plastic opening tool between the front and rear cases along the left edge of the controller. Rotate the tool toward the front of the controller to pry the two cases apart.
[* black] Grasp the controller by the battery compartment and the headphone jack. Lift the battery compartment away from the headphone jack, separating the rear case from the front case and logic board
.
[* red] Remove the seven 9.3 mm T8 Security Torx screws securing the rear case to the front case.
[*
black] Insert wisdom herea plastic opening tool between the front and rear cases along the left edge of the controller. Rotate the tool toward the front of the controller to pry the two cases apart.
[* black] Grasp the controller by the battery compartment and the headphone jack. Lift the battery compartment away from the headphone jack, separating the rear case from the front case and logic board
.

画像1

古いバージョン

新しいバージョン

画像2

古いバージョン

新しいバージョン