この手順に変更
- Caleb Karlsonによって編集
承認済みの編集 : Caleb Karlson
- 前
- 後
- 変更なし
手順ライン
| [* black] Since you followed the steps to take it apart, it's pretty easy to put back together as long as you follow the previous steps in reverse order, but I'll briefly go through them just in case. | |
| - | [* black] Flip over the laptop and slide the rear cover back over the hinges, making sure to screw in the two M2.5x5(5mm) screws holding in the rear cover. |
| + | [* black] Flip over the laptop and slide the rear cover back over the hinges, making sure to screw in the two M2.5x5(5mm) screws holding in the rear cover with your Phillips #0 Screwdriver. |
| [* black] Screw in the two M2x2(2mm) interior screws that hold in the rear cover, (hopefully, you've been keeping track of your screws at this point.) | |
| [* black] Slide the base cover back over the electronics. |