手順6に変更
- Caleb Karlsonによって編集
承認済みの編集 : Caleb Karlson
- 前
- 後
- 変更なし
手順ライン
| - | [* black] After flipping the laptop over and setting it down on top of the |
|---|---|
| + | [* black] After flipping the laptop over and setting it down on top of the base cover, you now have access to the eight M2.5x4(4mm) hinge screws. |
| [* black] Tighten any loose screws, but don't overdo it. There are issues that can be caused by screws that are too loose, as well as screws that are too tight. | |
| [* black] You can test how tight the screws are by ***carefully*** opening and closing the laptop. Adjust it accordingly, based on your personal preference for how tight you want it to be. | |
| - | [* black] Optionally, you can leave the case off like I did in my guide, or if you believe you are satisfied with the grip, you can put the cover back over the hinges before moving to the next step. |
| + | [* black] Optionally, you can leave the case off like I did in my guide, or if you believe you are satisfied with the grip, you can put the cover back over the hinges before moving on to the next step. |