手順20に変更
手順ライン
| + | [title] Replace LED Bar Part 2 |
|---|---|
| + | [* black] Loosen all screws and gently separate LED bar from the green heat transfer tape to avoid ripping it and keep it sticky to the tub. |
| + | [* black] Replace LED bar |
| + | [* black] If white plastic reflector bar breaks (very easily). Use tape on the backside to keep it stable during reassembly. |
| + | [* black] If white plastic reflector has broken T bars. Use hot glue to keep bar installed firmly against the tub during reassembly |
画像1
以前の画像はありません
追加
画像2
以前の画像はありません
追加
画像3
以前の画像はありません
追加