手順14に変更
手順ライン
| + | [title] Remove outer metal frame |
|---|---|
| + | [* black] Start lifting the outer metal frame from the side with lifting tab. This is to avoid any scraping motion over the buffer board gold foil flex cable. |
| + | [* black] The corners on the lift tab side is slightly flexable. Probably need 2 pry tool on each side of the corner to release it. Be gentle as LCD glass is just under the outer metal frame. Luckily it sits in a plastic tub (see next steps pics) so should be safe from any prying tool |
画像1
以前の画像はありません
追加
画像2
以前の画像はありません
追加