| | [title] Peel Tape and Unscrew T-Con Buffer Board Cover |
|---|
| | [* black] Peel off black tape surrounding the cover. Careful around the 3 connector regions (notes below) Peel off foil tape at the 2 ends of cover. Remove 4x phillips screws. |
|---|
| | [* black] LCD connector is very difficult. Its a flip latch connector with a handle tape just like the other end of cable. The handle tape covered under 2 differnet sticky tapes. |
|---|
| | [* black] First peel off the black tape and carefully separate the LCD connector latch handle tape. |
|---|
| | [* black] Next peel off the aluminum tape and latch handle tape is finally liberated. |
|---|