メインコンテンツにスキップ

手順 8 への変更

- Joshua Byrneによって編集

承認済みの編集 : Joshua Byrne

削除
追加
変更なし

手順ライン

[title] Replacement Note: New Heatsink
[* icon_note] Perform the following steps once you have installed the new processors and ready to re-install the heatsinks.
[* black] Preparing a New Heatsink for Re-installation. If you have a existing heatsink, follow the EXISTING Heatsink procedure.
[* black] Apply the top gasket included in the parts box to the top of the heatsink.
[* black] If you are replacing the lower processor heatsink with a new heatsink, install the bumper included in the parts box on the side of the heatsink.
[* icon_note] Do not apply thermal grease to a new heatsink. It comes with thermal grease already in place, covered by a cap over the bottom of the heatsink. Before installation, remove the cap.

画像1

以前の画像はありません

追加

画像2

以前の画像はありません

追加