メインコンテンツにスキップ

手順3に変更

- Nick Schultzによって編集

承認済みの編集 : Nick Schultz

変更なし

手順ライン

[title] Disconnect the antennas
-[* black] Insert one tip of your angled tweezers underneath the metal neck of each coaxial connector and lift straight up from the board.
-[* icon_reminder] To reconnect during reassembly, use tweezers to hold the connector in place over its socket and gently press down—the connector should "snap" into place. If it doesn't, reposition the head and try again.
+[* black] Insert one arm of your angled tweezers under the metal neck of each antenna [guide|25629|coaxial connector|stepid=64972|new_window=true] on the motherboard and lift straight up to disconnect them.
+[* icon_reminder] During reassembly, use tweezers to hold the connector in place over its socket and gently press down with your finger or a spudger—the connector should "snap" into place. If you're having trouble, reposition the head and try again.