手順3に変更
- Spencer Dayによって編集
承認済みの編集 : Spencer Day
- 前
- 後
- 変更なし
手順ライン
| + | [title] Unclip the logic board cover |
|---|---|
| + | [* icon_note] Throughout this repair, [product|IF145-491|keep track of each screw|new_window=true] and make sure it goes back exactly where it came from. |
| + | [* icon_note] While the Pixel 8a uses [link|https://en.m.wikipedia.org/wiki/Torx#Torx_Plus|Torx Plus|new_window=true] screws, standard Torx bits work. Make sure to apply constant, downward force to prevent stripping. |
| + | [* black] Use a Torx Plus 3IP screwdriver to remove the 15 screws securing the logic board cover: |
| + | [* red] Thirteen 4.3 mm‑long screws |
| + | [* orange] Two 1.9 mm‑long screws |
画像1
以前の画像はありません
追加
画像2
以前の画像はありません
追加