手順1に変更
- William Cookによって編集
承認済みの編集 : William Cook
- 前
- 後
- 変更なし
手順ライン
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* icon_caution] Replacing internal components improperly can lead to irreversible damage if not done correctly. |
| + | [* icon_note] Depending on where the soundbar is damaged, there are two different ways to remove the USB cable. This guide will try to cover both scenarios. |
| + | [* black] After disconnecting both speakers, unscrew the screws connecting the circuit board to the rear panel using a Phillips #1 screwdriver. |
| + | [* icon_note] The screws are 2.5 mm in diameter and 6mm in length. Like most screws, turn counter-clockwise to loosen them. |