手順3に変更
- Kristen Gismondiによって編集
承認済みの編集 : Kristen Gismondi
- 前
- 後
- 変更なし
手順ライン
| - | [* black] You should now be able to lift the front panel off of the rest of the device. |
|---|---|
| - | [* icon_caution] Be careful: the speakers will still be attached to the front panel. Being too rough could damage them. |
| - | [* black] The speakers are attached with different screws than the front panel, 3.5 mm in diameter and 4 mm in length. Use the JIS-J1 bit and Bit Driver from the Pro Tech toolkit to remove them. |
| - | [* icon_note] As always, turn counter-clockwise to remove the screws, and clockwise to reinstall them. |
| - | [* icon_caution] Ground yourself with the Anti-Static Wrist Strap to avoid shocking the speakers with static electricity and ruining them. |
| + | [* black] Lift the front panel off of the rest of the device. |
| + | [* icon_caution] The speakers will still be attached to the front panel. Being too rough could damage them. |
| + | [* black] Remove the 4 mm screws from the speakers using a JIS #1 screwdriver. |
| + | [* black] Remove the front panel from the device. |