手順2に変更
- Brendin Costaによって編集
承認済みの編集 : Brendin Costa
- 前
- 後
- 変更なし
手順ライン
| [* black] Heat the label gently with a heat gun or hair dryer. Once the adhesive is loosened, use a spudger to peel off the label carefully, revealing two additional screws. | |
| - | [* black] Using the Phillips |
| + | [* black] Using the Phillips J1 bit, remove the two remaining 4.78 mm screws exposed by the label removal. |