Razer Basilisk V3 Motherboard Replacement手順の1履歴

手順1に変更

2024年5月22日 - Kristen Gismondiによって編集

承認済みの編集 : Kristen Gismondi

-	[* red] ~~Using~~ a ~~Phillips J0~~ screwdriver~~, remove 6 4mm screws~~
-	[* orange] ~~Find the gap. Use~~ the flat end of ~~the~~ spudger~~, slowly pry up~~ the ~~edge~~ of the ~~board~~.
-	[* black] ~~Move~~ slowly in a ~~counter-clockwise~~ direction.
+	[* red] Remove six 4 mm screws using a JIS #0 screwdriver.
+	[* orange] Insert the flat end of a spudger in the gap between the motherboard and the rest of the mouse.
+	[* black] Slowly pry up the edge of the board, moving around the mouse slowly in a counterclockwise direction.