手順8に変更
- Sarah Westbergによって編集
承認済みの編集 : Sarah Westberg
- 前
- 後
- 変更なし
手順ライン
| - | [* red] Disconnect RTC battery cable. Slowly pry at the sides and pull out the cable. |
|---|---|
| - | [* orange] Disconnect NFC module cable (if applicable.) |
| - | [* yellow] Disconnect Fingerprint reader cable (if applicable.) |
| + | [* red] Use the point of a spudger to push on alternating sides of the RTC battery connector to "walk" it out of its socket and disconnect the RTC battery cable. |
| + | [* icon_note] It may take a lot of alternating before the connector comes out. Be patient, and don't pull on the cables. |
| + | [* orange] Disconnect NFC module [guide|25629|ZIF connector|stepid=64969|new_window=true] to remove the cable (if applicable). |
| + | [* yellow] Disconnect Fingerprint reader ZIF connector to remove cable (if applicable). |