メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順21に変更

Nations81さんによる編集

承認済みの編集 : Jake Devincenzi

変更なし

手順ライン

[* black] There are four orange and black rubber inserts that the hard drive sit into. one side has full circles and the other side has half circles. ( The other side of the half circles are located on the hard drive bracket that was previously removedremoved).
[* black] The new upper case may not have these inserts. e sure to remove them from the old and insert into the new.
[* black] The inserts are easily pried out with a spudger or a flat tipped screwdriver. They are not glued in, but instead have notched sides to hold them in place
.
[* black] There are four orange and black rubber inserts that the hard drive sit into. one side has full circles and the other side has half circles. ( The other side of the half circles are located on the hard drive bracket that was previously removedremoved).
[* black] The new upper case may not have these inserts. e sure to remove them from the old and insert into the new.
[* black] The inserts are easily pried out with a spudger or a flat tipped screwdriver. They are not glued in, but instead have notched sides to hold them in place
.