手順2に変更
- Supper Simonによって編集
承認済みの編集 : Supper Simon
- 前
- 後
- 変更なし
手順ライン
| + | [* icon_note] I've performed this on a few Fitbits where the adhesive was worn out enough that with a light amount of prying the touch screen assembly lifts right up |
|---|---|
| [* icon_note] A hairdryer on high should work you may have to use it for longer | |
| - | [* black] Heat the glass screen with heat gun to soften the adhesives |
| - | [* icon_caution] Start the next step on the opposite side of the Fitbit wording below the glass. This is due to the display cables being located there |
| + | [* icon_caution] Heat the glass screen with heat gun to soften the adhesives |
| [* black] Insert a razor blade between the glass and the body | |
| [* black] Keep going around the rim of the display until loose |