手順11に変更
- Kinsey Ewingによって編集
承認済みの編集 : Alex Diaz-Kokaisl
- 前
- 後
- 変更なし
手順ライン
| - | [* black] Fix the new battery |
|---|---|
| - | [* black] Carefully put everything back into position. Re-solder power connector, if it had to be de-soldered before. Fix it back into the round hole. |
| - | [* black] Close the case with the clip 1. The black and silver case can |
| + | [* black] Fix the new battery onto the foam and place it in the center of the position, which is marked by a white line. |
| + | [* black] Carefully put everything back into position. Re-solder the power connector, if it had to be de-soldered before. Fix it back into the round hole. |
| + | [* black] Close the case with the clip 1. The black and silver case can be fixed best using some transparent tape around the case. |