メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順2に変更

Andrew Bookholtさんによる編集

承認の保留中

削除済み
追加
変更なし

手順ライン

[* black] Disconnect the inverter cable by pulling its connector away from the socket on the inverter board.
[* icon_caution] The inverter board is a very thin and delicate circuit board that is easily broken. Use caution.
[* icon_note] This connector tends to stick in its socket. It is helpful to push the connector with the tip of a spudger through the two small holes in the top of the socket while pulling the connector away from the socket.
[* icon_caution] Make sure to grasp the inverter cabling by the black tape and not the individual wires. Pulling the wires themselves will surely damage the inverter cable.

画像1

以前の画像はありません

追加