Skip to main content

Changes to Step #12

Edit by Dayton

承認済みの編集 by Dayton

Deleted
Added
Unchanged

Step Lines

[* black] Pull the riser main up using the rope.
[* blackicon_caution] Be sure to keep the rope within the confines of the tripod to prevent the tripod from pulling over.
[* blackicon_caution] Be sure to watch the top of the tripod to align the riser main in the support slot.
[* blackicon_caution] Be sure to keep the rope within the confines of the tripod to prevent the tripod from pulling over.
[* blackicon_caution] Be sure to watch the top of the tripod to align the riser main in the support slot.