Skip to main content

Changes to Step #5

Edit by Dayton

承認済みの編集 by Dayton

Deleted
Added
Unchanged

Step Lines

[* blackicon_note] This particular pump is using a tripod with a block and tackle to lift the riser main. C-wrenches may also be used to lift the riser main.
[* black] Securely clamp and tighten the pipe elevator to the riser mainmain below the spout exit.
[* blackicon_note] This particular pump is using a tripod with a block and tackle to lift the riser main. C-wrenches may also be used to lift the riser main.
[* black] Securely clamp and tighten the pipe elevator to the riser mainmain below the spout exit.