メインコンテンツにスキップ

手順1に変更

- Joshua Pizzoによって編集

承認済みの編集 : Joshua Pizzo

変更なし

手順ライン

-[* black] Insert wisdom here.
+[* red] Remove the five JIS #01 5.6mm screw holding the motherboard in place.
+[* orange] Disconnect the Display,Keyboard, Trackpad, and USB daughter board ribbon connectors from the motherboard.
+ [* icon_note] Before disconnecting the ribbon cables lift the black tab before pulling the blue tabs on the cables.
+ [* icon_caution] Do not pull the cables out of the connector before lifting the black tab. Damage can occur to connector if not done so.