手順9に変更
- Sarah Westbergによって編集
承認済みの編集 : Sarah Westberg
- 前
- 後
- 変更なし
手順ライン
| - | [* black] Place the new sprocket on the cranks with the corresponding |
|---|---|
| - | [* black] Tighten the bolt to keep the sprocket in place (optional depending on bike cranks) |
| - | [* black] Push the cranks back onto the crank spindle still it stops |
| - | [* |
| + | [* black] Place the new sprocket on the cranks with the corresponding hole to hold the sprocket still. |
| + | [* black] Tighten the bolt to keep the sprocket in place (optional depending on bike cranks). |
| + | [* black] Push the cranks back onto the crank spindle still it stops moving and the other crank isn't pushed out. |
| + | [* icon_note] Make sure that the crank is placed well and balanced. |