手順3に変更
- Alex Diaz-Kokaislによって編集
承認済みの編集 : Alex Diaz-Kokaisl
- 前
- 後
- 変更なし
手順ライン
| [title] Only the door seal remains | |
| [* black] You're now left with the door seal. | |
| - | [* icon_reminder] During reassembly, use a Jimmy, or a similar tool, to remove any sealing foam in the door frame groove. |
| + | [* icon_reminder] During reassembly, perform the following: |
| + | [* black] Use a Jimmy, or a similar tool, to remove any sealing foam in the door frame groove. |
| + | [* black] Use a mild cleaning solution to fully clean the groove. |
| + | [* black] Reinstall your door by attaching the top edge first, then wrapping the seal around the frame's perimeter. |
| + | [* icon_note] You'll hear the gasket lock into the seam. |
| + | [* icon_note] You may have to stretch the seal a few inches at the final edge. |