修理を始めるには コミュニティ ストア

この手順に変更

- Jorden Walkeによって編集

承認済みの編集 : Jorden Walke

前
後
変更なし

手順ライン

[* black] Place the brake disc onto the hub and tighten it with a screwdriver or drill.
[* icon_note] Make sure the disc brake is facing upwards when screwing back on
[* icon_note] M5 x 10mm Bicycle Rotor Screw T25
-[* red] These are the screws that are inserted into the disc. There should be 6 screwed back in.
+[* red] Insert the screws back in the disc holes.