この手順に変更
- Jorden Walkeによって編集
承認済みの編集 : Jorden Walke
- 前
- 後
- 変更なし
手順ライン
| [* black] Place the brake disc onto the hub and tighten it with a screwdriver or drill. | |
| [* icon_note] Make sure the disc brake is facing upwards when screwing back on | |
| [* icon_note] M5 x 10mm Bicycle Rotor Screw T25 | |
| + | [* red] These are the screws that are inserted into the disc. There should be 6 screwed back in. |