手順1に変更
- Emily Kaplanによって編集
承認済みの編集 : Emily Kaplan
- 前
- 後
- 変更なし
手順ライン
| [* black] Turn the computer over so the back is facing up. | |
| - | [* black] Using a Torx |
| + | [* black] Using a T5 Torx screwdriver, unscrew the three screws (0.9 cm each) on the hinge of the device and the two on the side (0.7 cm). |
| [* black] Lift the backplate from the computer and the hard drive cover labeled in Picture 3. |