この手順に変更
- Cade Caldwellによって編集
承認済みの編集 : Cade Caldwell
- 前
- 後
- 変更なし
手順ライン
| - | [* black] Please note the first picture shows what the feet look like, the upper two feet are already removed. Next remove the 2 upper feet using a plastic removal tool if they are still in place. The upper feet are closer to the hinges for the screen. After this, remove the 2 J1 phillips screws (8mm) under the feet. |
|---|---|
| - | [* black] These are the final screws needed to be removed to remove the back panel. In total, you should remove 8 screws between Steps 1 and 2. |
| + | [* red] Next, remove the 2 upper feet using a plastic removal tool. (Please note that the upper feet are missing on this device. The first picture shows what the feet look like. The upper feet are closer to the hinges for the screen). |
| + | [* orange] After this, remove the 2 J1 Phillips-head screws (8mm) under the feet. |
| + | [* icon_note] These are the final screws needed to be removed to remove the back panel. In total, you should have remove 8 screws between Steps 1 and 2. |
| + | [* icon_reminder] Keep track of all screws |